Product ID:M-1364 CLEAR ADHESIVE TYPE II
MSDS Date:05/05/1987
FSC:8040
NIIN:00-270-8150
MSDS Number: BHMHY

STEVEN INDUSTRIES

39 AVENUE C
BAYONNE, NJ 07002-3417
US

Emergency Phone: 201-437-6501

Info Phone: 201-437-6501

Cage: 33150

STEVEN INDUSTRIES

8 BAYONNE, NJ 07002-3417 US

Telephone: 201-437-6501

Cage: 33150

LACTOL SPIRITS

CAS: 64742-89-8

ACGIH TLV: 400

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL;9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:INHALATION: MAY CAUSE
DIZZINESS,HEADACHE,NAUSEOUS,WEAKNESS OR IRRITATION.

First Aid:INHALATION: REMOVE TO FRESH AIR, RESTORE BREATHING, TREAT
SYMPTOMATICALLY- CONSULT PHYSICIAN. EYES: FLUSH IMMEDIATELY
WITH LARGE AMOUNTS OF WATER-TAKE TOPHYSICIAN. SKIN: WASH W/SOAP
AND WATER , REMOVE CONTAMINATED CLOTHING. CONSULTPHYSICIAN IF
NEEDED. INGESTION: DRINK 1-2 GLASSES OF WATER TO DILUTE. DO NOT
INDUCE VOMITING, CONSULT PHYSICIAN.

Flash Point Method:SCC
Flash Point:21F/-6.11C
Lower Limits:1.4
Upper Limits:12.0
Extinguishing Media:CO2-DRY CHEMICAL-FOAM
Fire Fighting Procedures:DO NOT USE WATER-EXCEPT WITH FOG NOZZLES.
Unusual Fire/Explosion Hazard:DON'T USE ON HOT SURFCS/AREAS IF ELEC
SPARKS ARE PRESENT/WHERE STATIC CHG MAY BEGENRTD.CLOSD CONTNRS MAY
EXPLD FROM PRESSURE.USE WTR IN COOL,UNRUPTRD CONTNRS.

Spill Release Procedures:REMOVE ANY SOURCE OF SPARK OR FLAME. PROVIDE
IMMEDIATE VENTILATION. AVOID BREATHING VAPORS ANDWEAR AN
APPROPRIATE RESPIRATOR. ADD ABSORBENT TO SPILL, PLACE IN SEALED
METAL CONTAINERS USING NON- SPARKING TOOLS.

Handling and Storage Precautions:STORE IN RED LABEL AREA IN ORIGINAL
CONTAINERS.
Other Precautions:GROUND ALL EQUIPMENT AND CONTAINERS.

Respiratory Protection:APPROVED CHEMICAL FILTERS DESIGNED TO REMOVE A
COMBINATION OF PARTICLES/VAPORS, IN CONFINED AREAS USE APPROVED AIR
LINE TYPE RESPIRATORS OR HOODS.
Ventilation:LOCAL EXHAUST RECOMMENDED.MECHANICAL(GENERAL) ACCEPTABLE.
WEAR DUST MASK WHILE SANDING DRY PAINT FILM.
Protective Gloves:SOLVENT RESISTANT GLOVES
Eye Protection:GOGGLES RECOMMENDED
Other Protective Equipment:APRON AND BOOTS RECOMMENDED, IF SKIN CONTACT
IS LIKELY, USE PROTECTIVE SKIN CREAM.
Work Hygienic Practices:EYE BATH AND SAFETY SHOWER.
Supplemental Safety and Health
NK

HCC:F2
Boiling Pt:B.P. Text:175-232F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Density:>AIR
Spec Gravity:0.90
Solubility in Water:NONE
Appearance and Odor:LIQUID-MILD

Stability Indicator/Materials to Avoid:YES
NK
Stability Condition to Avoid:EXCESSIVE HEAT AND FIRE.
Hazardous Decomposition Products:OXIDES OF CARBON
Conditions to Avoid Polymerization:HIGH TEMPERATURE

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.